ALCM
Anemostat diffuser
ALCM - The finned Square Anemostat is an end HVAC element for air distribution. The anemostat has a front outflow face of fixed profile blades arranged horizontally. The blades are supplied in various arrangements - basic (square), and arrangements I, H, L and U.
Properties
•Installation into ceiling or suspended below ceiling
•For offices, cinemas, restaurants, shopping centers, etc.
•Airflow volume from 110 to 1 800 m3/h
•Size AxB in mm: 250, 300, 400, 500, 600, 625
•Installation height from 2,6 to 4,0 m
•For cooling
•Supplied air is separated into four sides perpendicular one to each other
•Galvanized plenum box
•Front panel coated according RAL
Specifications
Anemostats are the end exhausting element for the distribution of the air. They are used in the rooms of height approx. 2,6 − 4 m and they are suitable for the supply and outlet of the air. Anemometers have the face outlet areas from the fixed sectional lamellas /plates/ arranged horizontally and they are produced in the following sizes 250, 300, 400, 500, 600 in five models of the face plates. They are supplied in a work−manship for the horizontal connection via the connecting box, for the vertical connection on a square piping with the regulation (without connecting box) and in a compact workmanship with the regulation R1. Anemostats are intended for environment protected against weather impacts with the classification of climatic conditions class 3K5, without condensation, frost, ice formation, and without water even from other sources than rain according to EN 60 72133, change A2. Air flow must have a temperature between -20 to +70 °C. Anemostats are suitable for systems without abrasive, chemical and adhesive particles.